How to Use the Pool Volume Calculator
- Choose the pool shape.
- Choose feet or meters.
- Enter the inside water dimensions.
- Select constant depth or shallow and deep ends.
- Enter the actual water depth.
- Select Calculate.
- Review gallons, liters and the geometric calculation.
Pool Volume Formulas
| Pool shape | Geometric volume |
|---|---|
| Rectangle | L × W × Davg |
| Round | π × (d ÷ 2)² × Davg |
| Oval (ellipse) | π × (L ÷ 2) × (W ÷ 2) × Davg |
For feet, multiply cubic feet by 7.48051948 to obtain US gallons. For meters, multiply cubic meters by 1,000 to obtain liters.
How to Calculate Average Pool Depth
Average Depth = (Shallow End + Deep End) ÷ 2
For example, (3 ft + 7 ft) ÷ 2 = 5 ft. This arithmetic average works best when the floor slopes approximately evenly. Complex hoppers, bowls, benches or multiple depth zones may require sectional measurements.
Measure actual water depth rather than wall height because the operating waterline normally sits below the top edge.
Pool Volume Example
Rectangular pool: 32 ft × 16 ft
Shallow end: 3 ft
Deep end: 6 ft
Average depth = (3 + 6) ÷ 2 = 4.5 ft
Volume = 32 × 16 × 4.5 = 2,304 ft³
Gallons = 2,304 × 7.48051948 ≈ 17,235 US gal
Liters ≈ 65,242 L
Rectangular, Round and Oval Pools
Rectangular: measure the inside water length and width.
Round: measure the diameter straight across the center of the water surface.
Oval: measure the longest and widest water-surface dimensions. This calculator models the footprint as a true ellipse. Some above-ground pools described as oval use a stadium or racetrack shape, so their actual capacity may differ.
For an irregular or freeform pool, divide the pool into simpler sections and add the estimated volumes instead of applying one universal approximation factor.
Gallons and Liters Conversion
| Relationship | Value |
|---|---|
| 1 cubic foot | 7.48051948 US gal |
| 1 US gallon | 3.785411784 L |
| 1 cubic meter | 1,000 L |
The calculator always reports both US liquid gallons and liters. It does not use Imperial gallons.
Why Pool Volume Is an Estimate
Actual water capacity can differ because of steps, benches, swim-outs, rounded corners, complex hoppers, uneven slopes, the waterline below the wall top and measurement error. The result is a transparent geometric estimate based on the dimensions entered.
This page does not recommend chemical doses, pump or heater sizes, fill time or water cost. Follow the instructions for the specific pool product or equipment. For generic three-dimensional shapes, use the Volume Calculator; for tank geometry, use the Tank Volume Calculator; and for a standalone cylinder, use the Cylinder Volume Calculator.
Frequently Asked Questions
How do I calculate how many gallons my pool holds?
Calculate the geometric volume in cubic feet and multiply by 7.48051948.
How do I find average pool depth?
For a steadily sloped floor, add the shallow and deep depths and divide by 2.
Should I measure wall height or water depth?
Use actual water depth for water-capacity estimates.
How many gallons are in one cubic foot?
One cubic foot contains approximately 7.48052 US gallons.
How many liters are in one cubic meter?
There are exactly 1,000 liters in one cubic meter.
How is a round pool calculated?
Use π × radius² × average depth.
How is an oval pool calculated?
This calculator models it as an ellipse: π × (L ÷ 2) × (W ÷ 2) × average depth.
Why might actual pool capacity differ?
Steps, benches, hoppers, irregular geometry and operating water level can change actual capacity.
