Area Calculator

Real-time Engine

Choose a 2D shape and enter its dimensions to calculate its area. The calculator shows the formula, calculation and result in square units.

Calculate area

Use the 90° distance to the base, not a slanted edge.
Radius is half the diameter.

Use the same measurement unit for every dimension.

Result

Choose a shape and enter its dimensions.

AdvertisementReserved Display SlotZero CLS placement

How to Use the Area Calculator

  1. Choose a two-dimensional shape.
  2. Select the measurement unit.
  3. Enter the required dimensions.
  4. Select Calculate.
  5. Review the area, formula and calculation.

Use the same length unit for every dimension. The result is shown in the corresponding square unit.

What Is Area?

Area measures how much two-dimensional space a flat shape covers. It is expressed in square units such as cm², m², in² or ft². A square unit represents a square that is one unit long and one unit wide.

Area Formulas for Common Shapes

ShapeFormulaRequired measurements
RectangleA = lwlength, width
SquareA = s²side
TriangleA = ½bhbase, perpendicular height
CircleA = πr²radius
TrapezoidA = ½(a + b)hparallel sides, perpendicular height
ParallelogramA = bhbase, perpendicular height
EllipseA = πabsemi-major and semi-minor radii

A is area, l is length, w is width, s is side length, b is base, h is perpendicular height, r is radius, a and b are the specified parallel sides or ellipse radii, and π is pi.

Area Calculation Examples

Rectangle

For length 8 and width 5: A = 8 × 5 = 40 square units.

Circle

For radius 4: A = π × 4² = 16π ≈ 50.27 square units.

Triangle

For base 9 and perpendicular height 4: A = ½ × 9 × 4 = 18 square units.

Trapezoid

For a = 8, b = 5 and h = 4: A = ½(8 + 5) × 4 = 26 square units.

Why Area Uses Square Units

Area counts the number of unit squares needed to cover a flat region. Because both dimensions are lengths, their units are multiplied together. The linear conversion factor is therefore squared: 1 meter equals 100 centimeters, but 1 m² equals 10,000 cm².

Perpendicular Height Explained

For triangles, parallelograms and trapezoids, height means the perpendicular—or 90-degree—distance from the chosen base to the opposite side or vertex. A slanted edge is not the height unless it happens to meet the base at a right angle.

How to Calculate an Irregular Area

Split the irregular region into rectangles, triangles or other common shapes. Calculate each piece separately, then add their areas. If one part is a cut-out, subtract that area instead.

Rectangle A: 10 × 8 = 80
Rectangle B: 4 × 3 = 12
Total = 92 square units

For room dimensions specifically in feet, use the Square Footage Calculator. For roof-specific geometry, use the Roof Square Footage Calculator.

Area vs. Surface Area vs. Volume

MeasurementDescribesUnits
Areaflat 2D regionsquare units
Surface areaoutside of a 3D objectsquare units
Volumespace inside a 3D objectcubic units

Use the Surface Area Calculator for the exterior of a solid or the Volume Calculator for the space inside it.

Frequently Asked Questions

What is the formula for area?

It depends on the shape. A rectangle uses l × w, a circle uses πr² and a triangle uses ½bh.

What units are used for area?

Square units such as cm², m², in² and ft².

How do I calculate rectangle area?

Multiply the rectangle's length by its width.

How do I calculate circle area?

Multiply π by the radius squared. Use the radius, not the diameter.

How do I calculate triangle area?

Multiply the base by the perpendicular height and divide by 2.

How do I calculate an irregular area?

Divide it into simple shapes, calculate each area, then add or subtract the pieces.

What is the difference between area and surface area?

Area usually describes a flat 2D region. Surface area totals the exterior surfaces of a 3D object; use the Surface Area Calculator.

Need the square footage of a room?

Use the Square Footage Calculator for room and surface measurements in feet and inches.

Found a problem with this calculator? Report an issue.