Surface Area Calculator

Real-time Engine

Choose a 3D shape and enter its dimensions to calculate total surface area. See the formula, calculation steps and result in square units.

Calculate surface area

Radius is half the diameter.

Use the same measurement unit for every dimension.

Result

Choose a shape and enter its dimensions.

AdvertisementReserved Display SlotZero CLS placement

How to Use the Surface Area Calculator

  1. Choose the three-dimensional shape.
  2. Select the measurement unit.
  3. Enter the required dimensions.
  4. Select Calculate.
  5. Read the total surface area, formula and calculation steps.

Use the same measurement unit for every dimension. The result uses the corresponding square unit.

What Is Surface Area?

Surface area is the total area covering the outside of a three-dimensional object. Because it measures surfaces rather than enclosed space, it is expressed in square units such as cm², m², in² or ft².

It can be understood as the amount of material needed to wrap every outside face or curved surface, before accounting for overlaps or waste.

Surface Area Formulas

ShapeTotal surface areaInputs
Cube6a²side
Rectangular prism2(lw + lh + wh)length, width, height
Sphere4πr²radius
Cylinder2πr(r + h)radius, height
Coneπr(r + s)radius, vertical height; s = √(r² + h²)

SA is total surface area, a is side length, l is length, w is width, h is vertical height, r is radius, s is cone slant height and π is pi.

Total vs. Lateral Surface Area

Total surface area includes every exterior face or surface. Lateral surface area covers the sides while excluding base faces.

Closed cylinder
Lateral = 2πrh
Total = 2πrh + 2πr²

Closed right cone
Lateral = πrs
Total = πrs + πr²

This calculator assumes a closed cylinder with two circular bases and a cone that includes its circular base. If a real object is open, the missing face must be excluded separately.

Surface Area Calculation Examples

Cube

A cube with side 5 cm has SA = 6 × 5² = 150 cm².

Rectangular prism

For dimensions 4 × 3 × 2, SA = 2(12 + 8 + 6) = 52 square units.

Cone

For radius 3 and vertical height 4, s = √(3² + 4²) = 5. Therefore SA = π × 3 × (3 + 5) = 24π ≈ 75.40 square units.

Surface Area vs. Volume

Surface area and volume describe different measurements and use different units.

MeasurementMeaningUnits
Surface areaoutside coveringsquare units
Volumespace insidecubic units

Need the space inside the shape? Use the Volume Calculator. For a flat two-dimensional shape, use the Area Calculator.

Common Surface Area Mistakes

  • Using cubic units instead of square units.
  • Mixing measurement units within one calculation.
  • Using diameter when the formula expects radius.
  • Substituting vertical cone height where slant height is required.
  • Forgetting the bases of a closed cylinder or cone.
  • Including a face that is open or missing from the real object.

Frequently Asked Questions

What is surface area?

Surface area is the total area of the outside surfaces of a three-dimensional object.

What units are used for surface area?

Square units such as cm², m², in² and ft².

What is the difference between total and lateral surface area?

Total surface area includes all exterior surfaces. Lateral surface area generally excludes bases.

How do I calculate cylinder surface area?

For a closed cylinder, use SA = 2πr(r + h), where r is radius and h is height.

How do I calculate cone surface area?

For a closed right cone, use SA = πr(r + s), where s = √(r² + h²).

Is surface area the same as volume?

No. Surface area measures outside area in square units, while volume measures enclosed space in cubic units. Use the Volume Calculator for enclosed space.

Found a problem with this calculator? Report an issue.